The Seidel Diesl is pleased to announce the release of Alliant Power’s AP80040 through AP80045 Remanufactured Electronic Control Modules (ECMs) for select Detroit™ Diesel Series 50® and Series 60® engine platforms. AP80043 through AP80045 are pre-programmed by Alliant Power specific to your supplied engine serial number. For more information regarding pre-programmed ECMs, refer to APTB 02/17. Please allow additional lead time for programming. Corresponding OEM part numbers are listed in the table below.
| AP PART NUMBER Non-Programmed |
AP PART NUMBER Pre-Programmed |
YEAR RANGE | APPLICATION | OEM PART NUMBER |
| AP80040 | AP80043* | 1994-2001 (On-Hwy) | DDEC IV Series 50 / 60 6 cyl 8.5L, 11L, 12.7L, 14L |
E23519307, R23519307 |
| 1994-Later (Off-Hwy) | ||||
| AP80041 | AP80044* | 1994-2001 (On-Hwy) | DDEC IV Series 60 6 / 8 cyl Updated |
E23519308, R23519308 |
| 1994-Later (Off-Hwy) | ||||
| AP80042 | AP80045* | 2004-2006 (On-Hwy) | DDEC V Series 60 EPA 04 12.7L, 14L |
E23535990, R23535990, 23535798, 23530802 |
*Programmed by Alliant Power at time of order. Please contact your Central Distributor for further information.